| id | Name | Unit | Numerical |
| 1 | Dia.of screw | mm | 50 |
| 2 | Screw L/D | 21 | |
| 3 | Shot volume | cm3 | 325 |
| 4 | Injection weight | g | 300 |
| 5 | Injection pressure | Mpa | 167 |
| 6 | Max.screw stroke | mm | 210 |
| 7 | Max.screw speed | rpm | 10-235 |
| 8 | Heationg capacity | Kw | 8 |
| 9 | No.of heating zone | Qty | 3 |
| 10 | Clamping blowing system | ||
| 11 | Clamping force of injection | KN | 500 |
| 12 | Clamping force of blowing | KN | 150 |
| 13 | Opening stroke of mold planten | mm | 120 |
| 14 | Lifign height of rotary table | mm | 60 |
| 15 | Max.platen size(L×W) | mm | 580x390 |
| 16 | Min.mould thickness | mm | 240 |
| 17 | Heating capacity of mould | Kw | 2.5 |
| 18 | Stripping system | ||
| 19 | Stripping stroke | mm | 210 |
| 20 | Driving system | ||
| 21 | Motor power | Kw | 20 |
| 22 | Hydraulic pressure | Mpa | 14 |
| 23 | Product range | ||
| 24 | Suitable bottle range | L | 0.015~0.8 |
| 25 | Max.bottle height | mm | ≤200 |
| 26 | Max.dia.of bottle | mm | ≤100 |
| 27 | Other | ||
| 28 | Dry cycle | s | 4 |
| 29 | Min.air pressure | Mpa | 1.2 |
| 30 | Discharge rate of compressed air | m3/min | >0.8 |
| 31 | Water flowage | m3/h | 3.5 |
| 32 | Total rated power with mould heating | Kw | 30 |
| 33 | Dimension(LxWxH) | mm | 3800x1600x2230 |
| 34 | Net weight | T | 7.5 |
Materials:suitable for majority kind of thermoplastic
resins such as
HDPE,LDPE,PP,PS,EVA and so on.
Cavity nuber of one mould correponding to product volume.(For reference)
