SJII Series Specific Injection Molding Machine

Features
Resistant to Deformation
The high rigidity clamping mechanism and little deformation of platen effectively reduce the clamping force in case of producing the same molded parts.
With the extended guiding sections of the tie bar holes for the movable platen, the steadiness of the movable platen is increased and the wear of guide rod mold is reduced.
The clean and neat appearance simplifies the layout of the factory.
Effective and energy-saving
With the patented plasticizing barrel groove design, the heating part of the barrel saves energy in the static test.
The high-hardness plasticizing screw can prevent black spots due to breaking and bending and increase the strength and durability. The double-carriage cylinder avoids the turning torque on the injection carriage guide during injection, increasing the injection precision and reducing the wear of the nozzle and mold.
It ensures that the hydraulic oil in use remains qualified as the new oil in the long run; in case of three-year reasonable maintenance, no replacement of hydraulic oil is needed.
Germany REXROTH variable displacement pump coupled with the imported hydraulic control components from Germany REXROTH or Japan YUKEN can achieve the reliability and stability of the system.
The 8” TFT true color LCD with independent CPU.
With the imported France VISHA or Germany NOVO transducers, the production efficiency of the whole machine is enhanced by 10 to 20% as compared to the general machine.
?The Data above were acquired by testing in the factory, only foryour reference. The specific data please accord to the actual equipment.
Injection pressure more than 300MPa ensures the formation of finished products with a higher flow length ratio.
?The Data above were acquired by testing in the factory, only foryour reference. The specific data please accord to the actual equipment.
The injection speed is 40% higher than that of a general injection molding machine. High-speed mold filling results in lower internal stress in the molded parts and reduces deformation.
?The Data above were acquired by testing in the factory, only foryour reference. The specific data please accord to the actual equipment.
The temperature control deviation of the static test is ±0.5, delivering convenient process adjustment and stability contro
?The Data above were acquired by testing in the factory, only foryour reference. The specific data please accord to the actual equipment.
The deviation of the platen parallelism control is within 50% of the national standard, reducing the wear and increasing the lifespan of mold.
?The Data above were acquired by testing in the factory, only foryour reference. The specific data please accord to the actual equipment.
The deviation of the precision in mold opening and closing is ±0.5, enhancing the level of automation.
?The Data above were acquired by testing in the factory, only foryour reference. The specific data please accord to the actual equipment.