 | Oil Heaters - STM
STM series oil heaters have both the standard and high temperature models, which are used to heat up the mould and maintain temperature, although they can be used in other similar applications. High temperature oil from the mould is returned to the cooling tank and cooled by indirect cooling. It is then pressurised by the high-pressure pump, sent to the heating tank and finally to the mould with a constant temperature. With our optimised design, It can reach a maximum of 200℃ and the HANYOUNG temperature controller can maintain an accuracy of ±1℃. |
 | Standard Heaters STM-E
STM-E (WE) series are applicable for heating up the moulds and maintaining temperature, and they also can be used in other similar applications. Firstly, these series adopt different cooling methods to cool down mediums, then mediums are conveyed to the moulds after pressurized by pump and heated up by electrical heated tube. The optimal design renders water be heated up to 120℃ and oil up to 150℃. |
 | Water Heaters - STM-W
STM-W series water heaters have both standard and high temperature models, which are used to heat up the mould and maintain temperature, although they can be used in other similar applications. High temperature water from the mould is returned to the cooling tank and cooled by either indirect cooling (For high temperature and high temperature plus pressure models) or direct cooling (For standard models). It is then pressurised by the high-pressure pump, sent to the heating tank and finally to the mould with a constant temperature. The OMRON temperature controller can maintain an accuracy of ±0.5℃. |
 | High Temp. High Pressure Water Heater STM-HPW
STM-HPW series water heaters have both standard and high
temperature models, which are used to heat up the mould and maintain
temperature, they can be used in imilar applications as well. High temperature
water from the mould is returned to the cooling tank and cooled by either
indirect cooling (For high temperature and high temperature plus pressure
models) or direct cooling (For standard models). It is then pressurised by the
high-pressure pump, sent to the heating tank and finally to the mould with a
constant temperature. The OMRON temperature controller can ensure an accuracy
of ±0.5℃. |
 | Large Flow Water Heaters - STM-WF
STM-WF series "Large Flow" water heaters are used to heat up the mould and maintain temperature, although they can be used in other similar applications. High temperature water from the mould is returned to the cooling tank and cooled by direct cooling. It is then pressurized by the high-pressure pump, sent to the heating tank and finally to the mould with a constant temperature. The HANYOUNG temperature controller can maintain an accuracy of ±0.5℃. |
 | Dual-purpose Water/Oil Heaters - STM-W/O
STM-W/O series of dual-purpose heaters are mainly used to heat up the mould and maintain its temperature, although they can be also used in other similar applications. High temperature water or oil return from the mould is cooled by indirect cooling and then sent to the pipe heaters via high - pressure pump for heating to a constant temperature. This unique design allows user to choose between water and oil as heat transfer medium. With our optimized design, the HANYOUNG temperature controller can maintain an accuracy of ±0.5℃. |
 | Large Flow Heater STM-F
This series are suitable for heating up moulds and maintaining temperature, also they can be used in extrusion molding and applications requiring large flow and cooling throughput. |
 | CFC-free Refrigerant Air-cooled Water Chiller SIC-A-R2
SIC-A-R2 series are applicable for cooling moulds to reduce products molding cycle; also they are available in the cooling of equipments in order to maintain a normal temperature. Besides, they are suitable for other industries with the need of cooling. |
 | Water-cooled Central Water Chillers - SICC-W-R2
SICC-W series are applicable for cooling moulds which reduce products molding cycle, also they are available in the cooling of equipments in order to maintain a normal temperature. Besides, they are suitable for other industries in the need of cooling. |
 | Colding / Heating Temperature Controllers-STC-W
It is mainly applicable to cooling or heating moulds for a long time, also suitable for patterns in which mould long heating shifts to cooling and vice versa. |
 | Air-cooling Chamber SACC
SACC series adopts highly-efficient heat exchanger to fulfill interchange of heat between inlet air and cooling water. Which lowers inlet air temperature to the output cold air with temperature of 12~24℃. This series are applicable for extrusion blow film line, cold-air stereotype of bag blaster, moulds dehumidification and preventing moisture condensation of moulds. |
 | Industrial Air Chiller SIAC-A-R2
SIAC-A-R2 series is mainly used for chilling and molding of plastic film and PE plastics bag or other situations where needs air-cooled air chiler. |
 | Water Flow Regulators - SFR
SFR series water flow regulators are designed to work with mould heaters, water chillers and cooling towers, which can be connected to more than one mould connectors. They have the function like temperature and flowrate displays, flowrate control in order to meet the requirement of different working conditions. Modularized combination ensures convenient installation and maintenance. It is a necessary device for modern plastic industry to improve its moulding efficiency. |
 | Pipe Heaters / Band Heaters / Thermocouples
With over 40 years experiences in this particular industry, Shini band heaters and pipe heaters are well-known worldwide. The heaters are manufactured from imported top quality raw materials with advanced techniques. They are widely used in mould heaters, dryers, moulding machines etc, ensuring long service life and high efficiency. |
 | Air-cooled Central Water Chillers - SICC-A-R2
SICC-A series are applicable for cooling moulds to reduce products molding cycle, also they are available in the cooling of equipments in order to maintain a normal temperature. Besides, they are suitable for other industries with the need of cooling. |
 | CFC-free Refrigerant Water-cooled Water Chiller SIC-W-R2
It is applied to plastics industry to precisely control moulds temperature so that molding cycle can be reduced and quality would be improved. Also SIC-W-R2 series can be applicable for electronic and machinery manufacturing to ensure normal operation temperature for devices. |
