id | Name | Unit | Numerical |
1 | Dia.of screw | mm | 40 |
2 | Screw L/D | 24 | |
3 | Shot volume | cm3 | 200 |
4 | Injection weight | g | 163 |
5 | Injection pressure | Mpa | 175 |
6 | Max.screw stroke | mm | 165 |
7 | Max.screw speed | rpm | 10-225 |
8 | Heationg capacity | Kw | 6 |
9 | No.of heating zone | Qty | 3 |
10 | Clamping blowing system | ||
11 | Clamping force of injection | KN | 300 |
12 | Clamping force of blowing | KN | 80 |
13 | Opening stroke of mold planten | mm | 120 |
14 | Lifign height of rotary table | mm | 60 |
15 | Max.platen size(L×W) | mm | 420x300 |
16 | Min.mould thickness | mm | 180 |
17 | Heating capacity of mould | Kw | 1.2~2.5 |
18 | Stripping system | ||
19 | Stripping stroke | mm | 180 |
20 | Driving system | ||
21 | Motor power | Kw | 15 |
22 | Hydraulic pressure | Mpa | 1.2 |
23 | Product range | ||
24 | Suitable bottle range | L | 0.005~0.8 |
25 | Max.dia.of bottle | mm | ≤100 |
26 | Other | ||
27 | Dry cycle | s | 3 |
28 | Min.air pressure | Mpa | 1.2 |
29 | Discharge rate of compressed air | m3/min | >0.8 |
30 | Water flowage | m3/h | 3 |
31 | Total rated power with mould heating | Kw | 22.56 |
32 | Dimension(L×W×H) | mm | 3050x1300x2150 |
33 | Net weight | T | 3.6 |
Materials:suitable for majority kind of thermoplastic
resins such as
HDPE,LDPE,PP,PS,EVA and so on.
Cavity nuber of one mould correponding to product volume.(For reference)